本篇來自這裡 Sublime Text 2 設置文件詳解 ，作者是中國的 IT開發者: 金三胖

做個備份。 無侵權之用意。

看來想駕馭好這軟件不弄清楚配置文件是不行了，周末找了時間把配置文件的每條配置信息都加上了中文注釋，現在貼出來和大家共享，裏面有解釋不清楚的也歡迎大家夥來互相討論:)

另外，這也是我的第一篇博客，以後我會多寫些前端方面的文章和大家共享，歡迎一起討論:)

Preferences.sublime-settings文件：

// While you can edit this file, it’s best to put your changes in // “User/Preferences.sublime-settings”, which overrides the settings in here. // // Settings may also be placed in file type specific options files, for // example, in Packages/Python/Python.sublime-settings for python files. { // Sets the colors used within the text area // 主題文件的路徑 “color_scheme”: “Packages/Color Scheme – Default/Monokai.tmTheme”,

// Note that the font_face and font_size are overriden in the platform // specific settings file, for example, “Preferences (Linux).sublime-settings”. // Because of this, setting them here will have no effect: you must set them // in your User File Preferences. // 設置字體和大小，必須在Settings-User裏重寫，這裏設置沒有任何效果 “font_face”: “Consolas”, “font_size”: 12,

// Valid options are “no_bold”, “no_italic”, “no_antialias”, “gray_antialias”, // “subpixel_antialias” and “no_round” (OS X only) // 字體選項：no_bold不顯示粗體字，no_italic不顯示斜體字，no_antialias和no_antialias關閉反鋸齒 // subpixel_antialias和no_round是OS X系統獨有的 “font_options”: [],

// Characters that are considered to separate words // 在文字上雙擊會全選當前的內容，如果裏面出現以下字符，就會被截斷 “word_separators”: “./\()\”‘-:,.;<>~!@#$%^&*|+=[]{}`~?”,

// Set to false to prevent line numbers being drawn in the gutter // 是否顯示行號 “line_numbers”: true,

// Set to false to hide the gutter altogether // 是否顯示行號邊欄 “gutter”: true,

// Spacing between the gutter and the text // 行號邊欄和文字的間距 “margin”: 4,

// Fold buttons are the triangles shown in the gutter to fold regions of text // 是否顯示代碼折叠按鈕 “fold_buttons”: true,

// Hides the fold buttons unless the mouse is over the gutter // 不管鼠標在不在行號邊欄，代碼折叠按鈕一直顯示 “fade_fold_buttons”: true,

// Columns in which to display vertical rulers //列顯示垂直標尺，在中括號裏填入數字，寬度按字符計算 “rulers”: [],

// Set to true to turn spell checking on by default // 是否打開拼寫檢查 “spell_check”: false,

// The number of spaces a tab is considered equal to // Tab鍵制表符寬度 “tab_size”: 4,

// Set to true to insert spaces when tab is pressed // 設为true時，縮進和遇到Tab鍵時使用空格替代 “translate_tabs_to_spaces”: false,

// If translate_tabs_to_spaces is true, use_tab_stops will make tab and // backspace insert/delete up to the next tabstop // translate_tabs_to_spaces設置为true，Tab和Backspace的刪除/插入作用於制表符寬度 // 否則作用於單個空格 “use_tab_stops”: true,

// Set to false to disable detection of tabs vs. spaces on load // false時禁止在載入的時候檢測制表符和空格 “detect_indentation”: true,

// Calculates indentation automatically when pressing enter // 按回車時，自動與制表位對齊 “auto_indent”: true,

// Makes auto indent a little smarter, e.g., by indenting the next line // after an if statement in C. Requires auto_indent to be enabled. //針對C語言的 “smart_indent”: false,

// Adds whitespace up to the first open bracket when indenting. Requires // auto_indent to be enabled. // 需要启用auto_indent，第一次打開括號縮進時插入空格？（沒測試出來效果…） “indent_to_bracket”: true,

// Trims white space added by auto_indent when moving the caret off the // line. // 顯示對齊的白線是否根據回車、tab等操作自動填補 “trim_automatic_white_space”: true,

// Disables horizontal scrolling if enabled. // May be set to true, false, or “auto”, where it will be disabled for // source code, and otherwise enabled. // 是否自動換行，如果選auto，需要加雙引號 “word_wrap”: false,

// Set to a value other than 0 to force wrapping at that column rather than the // window width // 設置窗口內文字區域的寬度 “wrap_width”: 0,

// Set to false to prevent word wrapped lines from being indented to the same // level // 防止被縮進到同一級的字換行 “indent_subsequent_lines”: true,

// Draws text centered in the window rather than left aligned // 如果沒有定義過，則文件居中顯示（比如新建的文件） “draw_centered”: false,

// Controls auto pairing of quotes, brackets etc // 自動匹配引號，括號等 “auto_match_enabled”: true,

// Word list to use for spell checking // 拼寫檢查的單詞列表路徑 “dictionary”: “Packages/Language – English/en_US.dic”,

// Set to true to draw a border around the visible rectangle on the minimap. // The color of the border will be determined by the “minimapBorder” key in // the color scheme // 代碼地圖的可視區域部分是否加上邊框，邊框的顏色可在配色方案上加入minimapBorder鍵 “draw_minimap_border”: false,

// If enabled, will highlight any line with a caret // 突出顯示當前光標所在的行 “highlight_line”: false,

// Valid values are “smooth”, “phase”, “blink”, “wide” and “solid”. // 設置光標閃動方式 “caret_style”: “smooth”,

// Set to false to disable underlining the brackets surrounding the caret // 是否特殊顯示當前光標所在的括號、代碼頭尾閉合標記 “match_brackets”: true,

// Set to false if you’d rather only highlight the brackets when the caret is // next to one // 設为false時，只有光標在括號或頭尾閉合標記的兩端時，match_brackets才生效 “match_brackets_content”: true,

// Set to false to not highlight square brackets. This only takes effect if // match_brackets is true // 是否突出顯示圓括號，match_brackets为true生效 “match_brackets_square”: false,

// Set to false to not highlight curly brackets. This only takes effect if // match_brackets is true // 是否突出顯示大括號，match_brackets为true生效 “match_brackets_braces”: false,

// Set to false to not highlight angle brackets. This only takes effect if // match_brackets is true // 是否突出顯示尖括號，match_brackets为true生效 “match_brackets_angle”: false,

// Enable visualization of the matching tag in HTML and XML // html和xml下突出顯示光標所在標簽的兩端，影響HTML、XML、CSS等 “match_tags”: true,

// Highlights other occurrences of the currently selected text // 全文突出顯示和當前選中字符相同的字符 “match_selection”: true,

// Additional spacing at the top of each line, in pixels // 設置每一行到頂部，以像素为單位的間距，效果相當於行距 “line_padding_top”: 1,

// Additional spacing at the bottom of each line, in pixels // 設置每一行到底部，以像素为單位的間距，效果相當於行距 “line_padding_bottom”: 1,

// Set to false to disable scrolling past the end of the buffer. // On OS X, this value is overridden in the platform specific settings, so // you’ll need to place this line in your user settings to override it. // 設置为false時，滾動到文本的最下方時，沒有緩沖區 “scroll_past_end”: true,

// This controls what happens when pressing up or down when on the first // or last line. // On OS X, this value is overridden in the platform specific settings, so // you’ll need to place this line in your user settings to override it. // 控制向上或向下到第一行或最後一行時發生什麼（沒明白也沒試出來） “move_to_limit_on_up_down”: false,

// Set to “none” to turn off drawing white space, “selection” to draw only the // white space within the selection, and “all” to draw all white space // 按space或tab時，實際會產生白色的點（一個空格一個點）或白色的橫線（tab_size設置的制表符的寬度），選中狀態下才能看到 // 設置为none時，什麼情況下都不顯示這些點和線 // 設置为selection時，只顯示選中狀態下的點和線 // 設置为all時，則一直顯示 “draw_white_space”: “selection”,

// Set to false to turn off the indentation guides. // The color and width of the indent guides may be customized by editing // the corresponding .tmTheme file, and specifying the colors “guide”, // “activeGuide” and “stackGuide” // 制表位的對齊白線是否顯示，顏色可在主題文件裏設置（guide，activeGuide，stackGuide） “draw_indent_guides”: true,

// Controls how the indent guides are drawn, valid options are // “draw_normal” and “draw_active”. draw_active will draw the indent // guides containing the caret in a different color. // 制表位的對齊白線，draw_normal为一直顯示，draw_active为只顯示當前光標所在的代碼控制域 “indent_guide_options”: [“draw_normal”],

// Set to true to removing trailing white space on save // 为true時，保存文件時會刪除每行結束後多餘的空格 “trim_trailing_white_space_on_save”: false,

// Set to true to ensure the last line of the file ends in a newline // character when saving // 为true時，保存文件時光標會在文件的最後向下換一行 “ensure_newline_at_eof_on_save”: false,

// Set to true to automatically save files when switching to a different file // or application // 切換到其它文件標簽或點擊其它非本軟件區域，文件自動保存 “save_on_focus_lost”: false,

// The encoding to use when the encoding can’t be determined automatically. // ASCII, UTF-8 and UTF-16 encodings will be automatically detected. // 編碼時不能自動檢測編碼時，將自動檢測ASCII, UTF-8 和 UTF-16 “fallback_encoding”: “Western (Windows 1252)”,

// Encoding used when saving new files, and files opened with an undefined // encoding (e.g., plain ascii files). If a file is opened with a specific // encoding (either detected or given explicitly), this setting will be // ignored, and the file will be saved with the encoding it was opened // with. // 默認編碼格式 “default_encoding”: “UTF-8″,

// Files containing null bytes are opened as hexadecimal by default // 包含空字節的文件被打開默認为十六進制 “enable_hexadecimal_encoding”: true,

// Determines what character(s) are used to terminate each line in new files. // Valid values are ‘system’ (whatever the OS uses), ‘windows’ (CRLF) and // ‘unix’ (LF only). // 每一行結束的時候用什麼字符做終止符 “default_line_ending”: “system”,

// When enabled, pressing tab will insert the best matching completion. // When disabled, tab will only trigger snippets or insert a tab. // Shift+tab can be used to insert an explicit tab when tab_completion is // enabled. // 設置为enabled時，在一個字符串間按Tab將插入一個制表符 // 設置为true時，按Tab會根據前後環境進行代碼自動匹配填補 “tab_completion”: true,

// Enable auto complete to be triggered automatically when typing. // 代碼提示 “auto_complete”: true,

// The maximum file size where auto complete will be automatically triggered. // 代碼提示的大小限制 “auto_complete_size_limit”: 4194304,

// The delay, in ms, before the auto complete window is shown after typing // 代碼提示延遲顯示 “auto_complete_delay”: 50,

// Controls what scopes auto complete will be triggered in // 代碼提示的控制範圍 “auto_complete_selector”: “source – comment”,

// Additional situations to trigger auto complete // 觸發代碼提示的其他情況 “auto_complete_triggers”: [ {“selector”: “text.html”, “characters”: “<”} ],

// By default, auto complete will commit the current completion on enter. // This setting can be used to make it complete on tab instead. // Completing on tab is generally a superior option, as it removes // ambiguity between committing the completion and inserting a newline. // 設为false時，選擇提示的代碼按回車或點擊可以輸出出來，但選擇true時不會輸出而是直接換行 “auto_complete_commit_on_tab”: false,

// Controls if auto complete is shown when snippet fields are active. // Only relevant if auto_complete_commit_on_tab is true. // auto_complete_commit_on_tab必須为true，控制代碼提示的活躍度（沒明白…） “auto_complete_with_fields”: false,

// By default, shift+tab will only unindent if the selection spans // multiple lines. When pressing shift+tab at other times, it’ll insert a // tab character – this allows tabs to be inserted when tab_completion is // enabled. Set this to true to make shift+tab always unindent, instead of // inserting tabs. // 設置为false，使用Shift + tab總是插入制表符 “shift_tab_unindent”: true,

// If true, the selected text will be copied into the find panel when it’s // shown. // On OS X, this value is overridden in the platform specific settings, so // you’ll need to place this line in your user settings to override it. // 選中的文本按Ctrl + f時，自動复制到查找面板的文本框裏 “find_selected_text”: true,

// // User Interface Settings //

// The theme controls the look of Sublime Text’s UI (buttons, tabs, scroll bars, etc) // Data\Packages\Theme – Default\Default.sublime-theme控制軟件的主題 “theme”: “Default.sublime-theme”,

// Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to // scroll slower, or set to larger than 1 to scroll faster // 滾動的速度 “scroll_speed”: 1.0,

// Controls side bar animation when expanding or collapsing folders // 左邊邊欄文件夾動畫 “tree_animation_enabled”: true, // 標簽頁的關閉按鈕 “show_tab_close_buttons”: true,

// OS X 10.7 only: Set to true to disable Lion style full screen support. // Sublime Text must be restarted for this to take effect. // 針對OS X “use_simple_full_screen”: false,

// Valid values are “system”, “enabled” and “disabled” // 水平垂直滾動條：system和disabled为默認顯示方式，enabled为自動隱藏顯示 “overlay_scroll_bars”: “system”,

// // Application Behavior Settings //

// Exiting the application with hot_exit enabled will cause it to close // immediately without prompting. Unsaved modifications and open files will // be preserved and restored when next starting. // // Closing a window with an associated project will also close the window // without prompting, preserving unsaved changes in the workspace file // alongside the project. // 熱推出功能！退出時不會提示是否保存文件，而是直接退出 // 下次打開軟件時，文件保持退出前的狀態，沒來得及保存的內容都在，但並沒有真實的寫在原文件裏 “hot_exit”: true,

// remember_open_files makes the application start up with the last set of // open files. Changing this to false will have no effect if hot_exit is // true // 軟件使用最後的設定打開文件，hot_exit为true時沒有效果 “remember_open_files”: true,

// OS X only: When files are opened from finder, or by dragging onto the // dock icon, this controls if a new window is created or not. // 針對OS X “open_files_in_new_window”: true,

// Set to true to close windows as soon as the last file is closed, unless // there’s a folder open within the window. This is always enabled on OS X, // changing it here won’t modify the behavior. // 針對OS X “close_windows_when_empty”: true, // 哪些文件會被顯示到邊欄上 // folder_exclude_patterns and file_exclude_patterns control which files // are listed in folders on the side bar. These can also be set on a per- // project basis. “folder_exclude_patterns”: [“.svn”, “.git”, “.hg”, “CVS”], “file_exclude_patterns”: [“.pyc”, “.pyo”, “.exe”, “.dll”, “.obj”,“.o”, “.a”, “.lib”, “.so”, “.dylib”, “.ncb”, “.sdf”, “.suo”, “.pdb”, “.idb”, “.DS_Store”, “.class”, “.psd”, “.db”], // These files will still show up in the side bar, but won’t be included in // Goto Anything or Find in Files “binary_file_patterns”: [“.jpg”, “.jpeg”, “.png”, “.gif”, “.ttf”, “.tga”, “.dds”, “.ico”, “.eot”, “.pdf”, “.swf”, “.jar”, “*.zip”],

// List any packages to ignore here. When removing entries from this list, // a restart may be required if the package contains plugins. // 刪除你想要忽略的插件，需要重启 “ignored_packages”: [“Vintage”] }